コンテンツにスキップ
地震や土砂災害、海上輸送の影響で一部地域に配送遅延が出ている可能性があります。心当たりのある地域にお住まいの方は、こちらから詳細をご確認ください。
2024年3月30日(土)午前10時から2時間程度、メンテナンスによるシステム停止を予定しています。ご協力のほど何卒よろしくお願いします。
大雪や地震、土砂災害、海上輸送の影響で一部地域に配送遅延が出ている可能性があります。心当たりのある地域にお住まいの方は、こちらから詳細をご確認ください。
2024年3月30日(土)午前10時から2時間程度、メンテナンスによるシステム停止を予定しています。ご協力のほど何卒よろしくお願いします。
SKU 4215

《お取り寄せ商品》Ethernet Controlled 8 Channel Relay 16A

送料区分: 650

商品コード: DFROBOT-DFR0146

発売日: 2018-11-21

短いURL: ssci.to/4215

この商品は取寄商品です

¥18,436
¥18,436 - ¥18,436
Current price ¥18,436

本商品はお取り寄せ商品(輸入代行)です。他の商品と同時にご注文いただいた場合、全ての商品が入荷してから出荷します。お急ぎの商品と一緒にご注文なさらないよう、ご注意下さい。この商品のお買い求めの手続きを完了し、代金のお支払いをいただいてから、お取り寄せを行います(請求書払いのご契約をいただいている場合には、もちろんこの契約が優先です)。納期は仕入先に在庫がある場合、通常1.5~2ヶ月ほどです。発注は定期的に、まとめて行いますので、お取り寄せ依頼時に仕入先在庫があっても、当社発注時に仕入先在庫がない場合、納期は未定となります。

本商品は電気用品安全法、電波法、その他日本の法律に準拠していない可能性があります。本商品のお取り寄せは輸入代行サービスです。お取り寄せのご案内をご確認の上、ご注文ください。当社はお取り寄せ品に関して一切の責任を持ちません。お客様自身で適法かつ安全にご利用いただけることを充分にご確認いただき、お取り寄せをご依頼ください。また商品が輸入できないなどの問題が発生した場合、ご注文をキャンセルする場合があります。



Introduction

The ETH008 provides eight volt free contact relay outputs with a current rating of up to 16Am. The module is powered from a 12vdc supply which can be regulated or unregulated. The DC input jack is 2.1mm with positive core polarity, DC supplies are required to supply at least 500mA at 12vdc. The relays are SPCO (Single Pole Change Over) types.
The normally open, normally closed and common pins are all available on the screw terminals.
The ETH008 provides a red LED mounted immediately next to each relay to indicate whether it is in a powered state (LED on), there is also two LED's mounted in the Ethernet connector which will flash with Ethernet traffic. Finally there is a green power LED just above the processor.

Relay Rating

load type Typical applications Rating Max DC load capacityEthernet Controlled 8 Channel Relay 16A - DFRobot
AC1 Non inductive orslightly inductive loads 16A @ 250V AC
AC15 Control of electromagnetic load (>72VA) 3A @ 120V AC 1.5A @ 240V AC
AC3 Control of motor 750W
DC1 Non inductive orslightly inductive loads 16A @ 24V DC
DC13 Control of electromagnetic loads 0.22A @ 120V DC0.1A @ 250V DC

Features

  • Controlled over Ethernet using simple TCP/IP commands.
  • Relays - 8
  • Power - 12V DC adaptor, supplied separately.
  • Configuration & Test interface - HTTP (webpage).
  • Control interface - TCP/IP over Ethernet.
  • Relay current - Up to 16Amp @24vdc or 250vac
  • Connections - Screw Terminals for N/O N/C and Common contacts.
  • Free Android and iPhone Apps are available to remotely control this module.
  • Please note additional options such as power supply, case and cables are available separately.
  • Specification

    • Power Supply: 12V@1A
    • Relay: 8
    • Interface: RJ45
    • Protocol: HTTP or TCP/IP over Ethernet
    • Relay current: 16Amp @24VDC/250VDC
    • Dimension: 133*74mm/ 5.23*2.91 inches

    Documents

    Full ETH008 Documentation
    Examples:

  • Java - command line application for controlling the module
  • Perl - Simple example of setting an output active/inactive by tcp
  • PHP script - Simple example of setting an output active/inactive by tcp
  • Python - command line application for controlling the module
  • Visual Basic - source code for simple program, includes UDP scan to determine any boards connected to the local network
  • Visual C# - source code for simple program, includes UDP scan to determine any boards connected to the local network
  • ShippingList

    • Ethernet Controlled 8 Channel Relay 16A (ETH008) x1



    上記製品説明はDFRobotのサイトのHTMLをそのまま転載しております。当社サイトでの表示確認をしていないため表現が正しくない部分が残っております。また情報の更新が遅れている可能性もありますので、製品情報についてはDFRobot社のサイトをご確認ください。当社コード番号"DFROBOT-"以降のコードを製品検索に利用できます。たとえば、DFROBOT-DFR0470-ENTは、”DFR0470-ENT”とDFRobot社のサイトにて検索ください。



    商品コード: DFROBOT-DFR0146