コンテンツにスキップ
地震や土砂災害、海上輸送の影響で一部地域に配送遅延が出ている可能性があります。心当たりのある地域にお住まいの方は、こちらから詳細をご確認ください。
2024年3月30日(土)午前10時から2時間程度、メンテナンスによるシステム停止を予定しています。ご協力のほど何卒よろしくお願いします。
大雪や地震、土砂災害、海上輸送の影響で一部地域に配送遅延が出ている可能性があります。心当たりのある地域にお住まいの方は、こちらから詳細をご確認ください。
2024年3月30日(土)午前10時から2時間程度、メンテナンスによるシステム停止を予定しています。ご協力のほど何卒よろしくお願いします。
SKU 4339

《お取り寄せ商品》SPI/I2C Monochrome 60x32 0.5" OLED Display for Arduino

送料区分: 650

商品コード: DFROBOT-DFR0376

発売日: 2018-11-21

短いURL: ssci.to/4339

この商品は取寄商品です

¥3,487
¥3,487 - ¥3,487
Current price ¥3,487

本商品はお取り寄せ商品(輸入代行)です。他の商品と同時にご注文いただいた場合、全ての商品が入荷してから出荷します。お急ぎの商品と一緒にご注文なさらないよう、ご注意下さい。この商品のお買い求めの手続きを完了し、代金のお支払いをいただいてから、お取り寄せを行います(請求書払いのご契約をいただいている場合には、もちろんこの契約が優先です)。納期は仕入先に在庫がある場合、通常1.5~2ヶ月ほどです。発注は定期的に、まとめて行いますので、お取り寄せ依頼時に仕入先在庫があっても、当社発注時に仕入先在庫がない場合、納期は未定となります。

本商品は電気用品安全法、電波法、その他日本の法律に準拠していない可能性があります。本商品のお取り寄せは輸入代行サービスです。お取り寄せのご案内をご確認の上、ご注文ください。当社はお取り寄せ品に関して一切の責任を持ちません。お客様自身で適法かつ安全にご利用いただけることを充分にご確認いただき、お取り寄せをご依頼ください。また商品が輸入できないなどの問題が発生した場合、ご注文をキャンセルする場合があります。



Introduction

OCELL is a 0.5" micro OLED display designed for Arduino and other microcontrollers. This micro OLED display is small as the grown-up's fingernail- 0.5" only. It has 450cd/m^2 screen brightness with extremely high contrast and readability; moreover, it contains 60 x 32 independent white OLED pixels that each can be separately controlled by the driver chip. This means you can display any images and words on the screen . Except this, the spontaneous light OLED display does not require a backlight, which greatly reduces the power consumption.

The Oled screen supports SPI (Default setting ) and I2C interface. You could connect it to Ardunio micro directly without doing any PCB layout by yourself, also you could wire it to any other MCUs like STM series , 51 series and so on. It is a good choice for a DIYer to make a interesting stuff by Arduino. Also it is very convenient for a pro-engineer to quickly develop and test a project which need a tiny COOL OLED display.

Project 1: Get Started with 0.5" OLED Display

Do you need a really, really small OLED display Search no more, and check out this tutorial. Hardware components:
SPI/I2C Monochrome 60x32 0.5" OLED Display for Arduino

Arduino UNO & Genuino UNO
DFRobot Arduino Jumper Cables (M/M) (65 Pack)

Specification

  • Operating Voltage: 3.3V -5V
  • PCB dimension: 17.8mm x 15.5mm (0.70*0.61")
  • Screen size: 0.5" inch (W*H: 15.30x10.20 mm)
  • Color: Monochrome (white)
  • OLED type: PM -OLEDOLED driver: LD7032
  • Pixels : 60 x 32
  • Contrast: 2000: 1
  • Communication: SPI, I2C

Documents

ShippingList

  • Micro Oled driver board x1
  • 0.5“ Oled Display x1
  • 5 Pin header x2



上記製品説明はDFRobotのサイトのHTMLをそのまま転載しております。当社サイトでの表示確認をしていないため表現が正しくない部分が残っております。また情報の更新が遅れている可能性もありますので、製品情報についてはDFRobot社のサイトをご確認ください。当社コード番号"DFROBOT-"以降のコードを製品検索に利用できます。たとえば、DFROBOT-DFR0470-ENTは、”DFR0470-ENT”とDFRobot社のサイトにて検索ください。



商品コード: DFROBOT-DFR0376