コンテンツにスキップ
地震や土砂災害、海上輸送の影響で一部地域に配送遅延が出ている可能性があります。心当たりのある地域にお住まいの方は、こちらから詳細をご確認ください。
2024年3月30日(土)午前10時から2時間程度、メンテナンスによるシステム停止を予定しています。ご協力のほど何卒よろしくお願いします。
大雪や地震、土砂災害、海上輸送の影響で一部地域に配送遅延が出ている可能性があります。心当たりのある地域にお住まいの方は、こちらから詳細をご確認ください。
2024年3月30日(土)午前10時から2時間程度、メンテナンスによるシステム停止を予定しています。ご協力のほど何卒よろしくお願いします。
SKU 5119

《お取り寄せ商品》2.5g 360 degree Micro Servo (0.45kg)

送料区分: 650

商品コード: DFROBOT-SER0037

発売日: 2018-11-21

短いURL: ssci.to/5119

この商品は取寄商品です

¥1,518
¥1,518 - ¥1,518
Current price ¥1,518

本商品はお取り寄せ商品(輸入代行)です。他の商品と同時にご注文いただいた場合、全ての商品が入荷してから出荷します。お急ぎの商品と一緒にご注文なさらないよう、ご注意下さい。この商品のお買い求めの手続きを完了し、代金のお支払いをいただいてから、お取り寄せを行います(請求書払いのご契約をいただいている場合には、もちろんこの契約が優先です)。納期は仕入先に在庫がある場合、通常1.5~2ヶ月ほどです。発注は定期的に、まとめて行いますので、お取り寄せ依頼時に仕入先在庫があっても、当社発注時に仕入先在庫がない場合、納期は未定となります。

本商品は電気用品安全法、電波法、その他日本の法律に準拠していない可能性があります。本商品のお取り寄せは輸入代行サービスです。お取り寄せのご案内をご確認の上、ご注文ください。当社はお取り寄せ品に関して一切の責任を持ちません。お客様自身で適法かつ安全にご利用いただけることを充分にご確認いただき、お取り寄せをご依頼ください。また商品が輸入できないなどの問題が発生した場合、ご注文をキャンセルする場合があります。



Introduction

This small form factor micro servo with 360 degree continuous rotation is compatible with servo shields for Arduino. It's a very versatile small servo motor for micro robots or other applications where you don't have much space and the need of a full rotational motor with the benefits of a servo. This servo is capable of full 360 degree continuous rotation and can be connected to an output pin of an Arduino board directly without the need of a motor driver.

Programming the rotation in the Arduino IDE is as easy as the programming of the servo movement. With the included servo library from the Arduino website (link below) you can just make the servo rotating clockwise, counterclockwise or stop by writing the related servo angels. (0 for full speed clockwise, 90 for stop and 180 full speed counterclockwise, it is not allowed to control its position like normal servo does.)

Warning: A higher voltage will damage the servo permanently (recommended voltage is 5.0V). Do not stall the servo on purpose or the gear will break. The upper and lower part of the casing is straped together with a plastic strip. Do not damage that plastic strip otherwise the servo may fall apart.

Specification

  • Model: D2S51
  • Control: PWM
  • Frequency: 1500µs/50Hz
  • Rotation sensor: high precision potentiometer
  • Rotation Angle: 360
  • Voltage: 4.8V-6.0V DC
  • Temperature: -20℃ - 60℃
  • Motor Driver: MOSFET
  • Pulse Width: 900 - 2100µs
  • Midpoint Pulse: 1500µs
  • Speed (non-loaded):
    • 0.09sec/60 degree@4.8V
    • 0.07sec/60 degree@6.0V
  • Torque (full-loaded):
    • 0.45kg.cm@4.8V
    • 0.60kg.cm@6.0V
  • Static current: <0.05A/4.8V < 0.05A/6.0V
  • Working current: <0.10A/4.8V < 0.10A/6.0V
  • Locked-rotor current: <0.5A/4.8V < 0.5A/6.0V
  • Motor type: coreless
  • Gear material: POM
  • Body material: ABS
  • Weight: 2.90g
  • Size: 19.60*8.00*16.30mm(0.77*0.31*0.64")

Documents

ShippingList

  • servo x1
  • mounting screw x2
  • screw for servo horn attachment x2
  • servo horn (different shape) x4



上記製品説明はDFRobotのサイトのHTMLをそのまま転載しております。当社サイトでの表示確認をしていないため表現が正しくない部分が残っております。また情報の更新が遅れている可能性もありますので、製品情報についてはDFRobot社のサイトをご確認ください。当社コード番号"DFROBOT-"以降のコードを製品検索に利用できます。たとえば、DFROBOT-DFR0470-ENTは、”DFR0470-ENT”とDFRobot社のサイトにて検索ください。



商品コード: DFROBOT-SER0037